System Settings - Canon MF6500 Series Service Manual

Chapter 1
*: indicates factory settings.

1.2.3.9 SYSTEM SETTINGS

LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / KaserBase MF6560PL / / LaserBase MF6580PL
Additional Functions
1. DEVICE INFO
2. NETWORK SETTINGS
3. COMMUNICATIONS
4. REMOTE UI
5. ACCESS TO DEST.
6. CHECKING THE LOG
7. USE DEVICE USB
*: indicates factory settings.
1-12
Download Free Service Manual And Resetter Printer at http://printer1.blogspot.com
Available Settings
DEVICE NAME, LOCATION
TCP/IP SETTINGS: IP ADDRESS AUTO. (OFF(*), ON(*); DHCP, BOOTP,
RARP), IP ADDRESS, SUBNET MASK, GATEWAY ADDRESS, USE LPD
(ON(*); PORT NO., OFF), RAW SETTINGS (ON(*); PORT NO., USE
BIDIRECTIONAL, OFF), USE HTTP (ON(*); PORT NO., OFF), SET IP ADD
RANGE (OFF(*), ON), RX MAC ADD SET. (OFF(*), ON)
SNMP SETTINGS: USE SNMP (ON(*): PORT NO., OFF), COMMUNITY
NAME 1, COMMUNITY NAME 2, SNMP WRITABLE 1 (ON(*), OFF), SNMP
WRITABLE 2 (ON, OFF(*))
DEDICATED PORT: ON(*), OFF
ETHERNET DRIVER: AUTO DETECT (AUTO(*), MANUAL), DUPLEX
(HALF DUPLEX(*), FULL DUPLEX), ETHERNET TYPE (10 BASE-T(*), 100
BASE-TX)
VIEW IP ADDRESS: IP ADDRESS, SUBNET MASK, GATEWAY ADDRESS
STARTUP TIME SET.: 0(*) to 300 SEC.
TX START SPEED: 2400 to 33600(*) bps
RX START SPEED: 2400 to 33600(*) bps
MEMORY LOCK SETTI: OFF(*), ON (PASSWORD, REPORT PRINT,
MEMORY RX TIME)
ON(*), OFF
RESTRICT NEW ADD. : OFF(*), ON
FAX DRIVER TX: OFF, ON(*)
ON, OFF(*)
OFF, ON(*)
0011-4296