12) Lay the host machine with its right side down and shift the base plate [1]
by approximately 30 mm away from the pick-up drive assembly [2].
13) Remove the pick-up drive assembly [1].
- 2 screws [2]
14) Remove the cassette pick-up solenoid [1].
- 1 screw [2]
3.4.5 Cassette Separation Pad
3.4.5.1 Removing the Cassette Separation Pad
/ i-SENSYS LBP5360 / i-SENSYS LBP5300
1) Remove the cassette separation pad [1].
- 2 screws [2]
F-3-151
F-3-152
F-3-153
F-3-154
3.4.6 Manual Pickup Roller
3.4.6.1 Removing the Manual Feed Pick-Up Roller
/ i-SENSYS LBP5360 / i-SENSYS LBP5300
1) Remove the manual feed pick-up roller [1].
- 2 claws [2]
3.4.7 Multi-purpose Pickup Solenoid
3.4.7.1 Preparation for Removing the Manual Feed Pick-
Up Solenoid
/ i-SENSYS LBP5360 / i-SENSYS LBP5300
1) Detach the rear cover. (page 3-1)[Removing the Rear Cover]
2) Remove the fixing assembly. (page
Assembly]
3) Detach the upper cover. (page 3-2)[Removing the Upper Cover]
4) Detach the left cover. (page 3-1)[Removing the Left Cover]
5) Remove the right cover. (page 3-1)[Removing the Right Cover]
6) Remove the ETB unit. (page 3-15)[Removing the ETB Unit]
7) Remove the front cover unit. (page 3-2)[Removing the Front Cover]
8) Remove the pick-up / feed assembly. (page 3-17)[Removing the Pick-
Up / Feed Assembly]
3.4.7.2 Removing the Manual Feed Pick-Up Solenoid
/ i-SENSYS LBP5360 / i-SENSYS LBP5300
1) Remove the cassette guide [1].
- 1 claw [2]
0013-9994
2) Remove the right hinge [1].
- 1 screw [2]
Chapter 3
F-3-155
F-3-156
3-25)[Removing the Fixing
F-3-157
0013-9983
0014-0422
0014-0424
3-21