Registration Sensor; Removing The Registration Sensor - Canon MF6500 Series Service Manual

[3].
[1]
6) Remove the two screws [1] and move the guide [2] out of the way.
7) Remove the drum shutter lever 1/2 [3].
[2]
8) Remove one E-ring [1], two bearings [2], and left registration roller [3].
[2]
When reinstalling the right registration roller, the grounding spring [2] must
be in touch with the end [1] of this roller. It is recommended to use tweezers
when reinstalling the E-ring [3].
Download Free Service Manual And Resetter Printer at http://printer1.blogspot.com
[2]
[3]
[1]
[2]
F-7-22
[3]
[1]
F-7-23
[3]
[2]
[1]
F-7-24

7.6.11 Registration Sensor

7.6.11.1 Removing the Registration Sensor

LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / Kaser-
Base MF6560PL / / LaserBase MF6580PL
1) Remove the two shafts [1], and then remove the transfer guide [2].
[2]
2) Release the two hooks [1], and then detach the registration sensor cover
[2].
Chapter 7
[1]
[2]
[3]
F-7-25
[1]
[1]
F-7-26
0011-5383
7-9