Registration Solenoid; Removing The Registration Solenoid; Release Solenoid; Removing The Release Solenoid - Canon MF6500 Series Service Manual

Chapter 4
[1]
3) Remove the screw [1], and then remove the pickup solenoid [2].

4.4.14 Registration Solenoid

4.4.14.1 Removing the Registration Solenoid

LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / Kaser-
Base MF6560PL / / LaserBase MF6580PL
1) Remove the feed frame unit.
2) Remove the three screws [1], and then remove the drive unit [2].
3) Remove the screw [1], and then remove the pickup solenoid [2].
[2]

4.4.15 Release Solenoid

4.4.15.1 Removing the Release Solenoid

LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / Kaser-
4-12
Download Free Service Manual And Resetter Printer at http://printer1.blogspot.com
[2]
F-4-36
[1]
[2]
F-4-37
[1]
[2]
F-4-38
[1]
F-4-39
Base MF6560PL / / LaserBase MF6580PL
1) Detach the rear cover.
2) Remove one connector [1] and one screw [2], and then remove the release
solenoid [3].

4.4.16 Separation Pad

4.4.16.1 Removing the Separation Pad

LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / Kaser-
Base MF6560PL / / LaserBase MF6580PL
1) Open the open/close cover.
2) Release the two claws [1], and then remove the separation pad [2].
0011-5241
When reinstalling the separation pad, be sure to put the spring [2] in the
groove [1].
0011-5243
[3]
[2] [1]
F-4-40
[1]
[2]
[1]
F-4-41
[2]
[1]
F-4-42
0011-5237