2) Disconnect the connector [1], release the two hooks [2], and then remove
the heat discharge fan [3].
[1]
9.4.13 Speaker
9.4.13.1 Removing the Speaker
LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / Kaser-
Base MF6560PL / / LaserBase MF6580PL
1) Detach the right cover and rear cover.
2) Disconnect the connector [1], and then remove the cable from the cable
guide.
3) Remove the two screws [1], and then remove the speaker [2].
[1]
Download Free Service Manual And Resetter Printer at http://printer1.blogspot.com
[3]
[2]
F-9-30
[1]
F-9-31
[2]
F-9-32
0011-5493
Chapter 9
9-11
Need help?
Do you have a question about the MF6500 Series and is the answer not in the manual?