Threading The Machine - ELNA Lotus Instruction Manual

x
q
z
w
c
r
b
y
m
c
b
z
x
e
v
t
n
n
m

Threading the Machine

Raise the presser foot. Press the needle up/down button
q to raise the thread take-up lever to its highest position.
q Needle up/down button
CAUTION:
Turn OFF the power switch before threading the
machine.
v
• Threading the machine
z Turn the spool thread guide w in the direction of
arrow as illustrated.
Pass the end of the thread through the spool
thread guide w.
x Pass the thread through the thread guide (A) e.
c Draw the thread around the thread guide (B) r.
v Draw the end of the thread down around the check
spring holder t.
t Check spring holder
b Firmly draw the thread up from right to left over the
take-up lever, and down into the take-up lever eye
y.
u
n Pass the thread through the lower thread guide
u. Slide the thread behind the needle bar thread
guide on the left i.
i
m Thread the needle from front to back, or use the
needle threader (see page 32).
30