Blind Hem - ELNA Lotus Instruction Manual

q w
z
0.4 – 0.7 cm
e
q
x
c
e
0.4 – 0.7 cm
e
w
r
y
t
r
t
y

Blind Hem

q Stitch pattern:
w Needle thread tension:
e Presser foot:
z Use the same color thread as the fabric.
On heavy weight fabrics that ravel, the raw edge
should be overcast first.
Fold the hem, as illustrated.
q Heavy weight fabric
w Light weight fabric
e Wrong side of the fabric
x There is a sliding guide screw on the blind hem foot
that allows you to control where the needle pierces
the edge of the fabric fold.
Adjust the screw so that at the leftmost position of the
stitch, the needle just pierces the edge of the fold. If
the needle pierces too far left, the stitches will show
on the right side of the fabric.
c Lower the presser foot. Sew, guiding the folded edge
along the guide in the foot.
Open the fabric after sewing.
r Screw
t Guide
y Folded edge
64
10
1 to 4
Blind hem foot G