Threading The Machine - ELNA 2000 Series Manual

1
3
5
2
4
6

Threading the Machine

Turn the flywheel toward you to raise the needle to
its highest position.
Raise the presser foot.
1. Pull the thread under the thread guide.
2. Guide the thread down the right side slot into
the tension area, continuing down around the
check spring holder.
3. Firmly pull the thread from right to left, over the
take-up lever and down into the take-up lever
eye.
4. Pull the thread down behind the lower thread
guide.
5. Pull thread down behind left needle bar thread
guide.
6. Thread the needle from front to back.
15