Threading The Machine - ELNA eXpressive 850 Instruction Manual

x
v
b
n
m
z
w
e
x
r
u
v
z
c
c
r
y
t
i
b
n
m
o

Threading the Machine

Press the needle up/down button to raise the take-up lever
to the highest position.
Press the lockout key to lockout the machine. Raise the
presser foot.
q Lockout key
Pass the thread in order from z to m.
z Hold the thread with both hands and pass the thread
into the guide slot.
q
w Guide slot
x Hold the thread with both hands and draw the thread
around the corner of the guide.
Firmly pull the thread toward you along the right
channel until the thread snaps.
e Corner of the guide
r Right channel
c Draw the thread down along the right channel and
around the bottom of the thread guide plate.
Pull the thread up along the left channel.
r Right channel
t Thread guide plate
y Left channel
v While holding the thread at the spool, firmly draw the
thread up and to the back of the take-up lever. Draw
the thread forward to draw it into the eye of the take-up
lever.
u Eye of the take-up lever
b Then pull the thread down along the left channel
and through the lower thread guide.
i Lower thread guide
n Slide the thread behind the needle bar thread guide
from the left.
o Needle bar thread guide
m Thread the needle with the needle threader (refer to
the next page).
13