ELNA Lotus Instruction Manual page 60

x
c
i
o
v
b n
!1
m
!0
!2
x Attach the zipper foot with the pin on the right. Sew
through all the layers from the end of the zipper
opening, guiding the zipper teeth along the edge of
the foot.
c Stop the machine 2˝ (5 cm) before the foot reaches
the slider on the zipper tape. Raise the presser foot.
Open the zipper then lower the foot and stitch the
remainder of the seam.
i Slider
o 2˝ (5 cm)
v Close the zipper and open the upper fabric flat over
the zipper. Baste the upper fabric and zipper tape
together.
!0 Basting stitch
b Detach the foot and attach it with the pin on the left.
Backstitch across the end of the opening to 3/8˝ (1
cm). Turn the fabric 90 degrees and stitch through the
garment and zipper tape.
!1 Backstitch
n Stop the machine 2˝ (5 cm) before the foot reaches
the slider on the zipper tape. Raise the presser foot.
Remove the basting stitches.
!2 Basting stitches
m Open the zipper, then lower the foot and stitch the
remainder of the seam. After finished sewing, remove
the basting stitches on the upper fabric.
56