P25 Systems - Uniden BCD96P2 Owner's Manual

2. At 'Program System' press E/
3. At 'Select System' scroll to the system where you want to create a site and press E/
4. Scroll to 'Edit Site' and and press E/
5. At 'Select Site' scroll to 'New Site' and press E/
Continue at 'Edit Name' below, and then see Creating Groups and Programming Frequencies/IDs.
To Edit Site Options:
1. Press MENU.
2. At 'Program System' press E/
3. At 'Select System' scroll to the system that has the site you want to edit and press E/
4. Scroll to 'Edit Site' and and press E/
5. At 'Select Site' scroll to the site you want to edit and press E/
6. Scroll to the options below and press E/
Press SCAN/SEARCH to return to scanning when you have completed editing.
7.
Note: Not all options will appear for EDACS SCAT and LTR sites.
Edit Name (no EDACS SCAT) assigns a name to the site.
Scroll to 'Edit Name' and press E/
Set Quick Key assigns quick key to a site and will be scanned when the key is turned on. The
default setting is no quick key.
1. Scroll to 'Set Quick Key' and press E/
2. Scroll to the quick key number (0-99 or .No for no quick key) you want assigned to the site
and press E/
.
Note: Pressing the first number of a 2-digit quick key will get you closer, 1 for 10, 2 for 20,
etc. then scroll to second digit.
Set Start-up Key allows you to turn on the scanner with the site enabled for scan using the
Startup Configuration. The default setting is no startup key.
1. Scroll to 'Set Startup Key' and press E/
2. Scroll to (or enter) the startup key number (0-9 or .No for no startup key) you want assigned
to the site E/ to save and exit.
Edit Band Plan (Motorola Custom/P25/VHF/UHF only) Band plans are required so the scanner
can correctly determine the voice channel frequencies.

P25 SYSTEMS

For P25 Systems there are two types of P25 systems: Explicit mode and Implicit mode. Most P25
systems use Explicit mode. Explicit mode systems transmit all information needed to determine
voice frequencies on the control channel. For Explicit mode systems, leave all entries blank. The
system automatically detects the band plan and fills in the entries. You must supply the system's
band plan for Implicit systems for the scanner to correctly determine voice frequencies.
1. Scroll to 'Edit Band Plan' and press E/
2. At 'Select Plan' scroll to 'Band Plan 0-9, A-F' and press E/
3. At 'Input Base Freq' enter the base frequency and press E/
4. At 'Input Spacing' enter the step size and press E/
40
.
.
.
.
.
.
. See Entering Text.
.
.
.
.
.
.
.
.
.