Settings Menus; Set Backlight - Uniden BCD96P2 Owner's Manual

29.7-49.99 10
50-53.98 20
54-71.95 50
72-75.995 5
76-87.95 50
88-107.9 100
108-136.9916 8.33
137-143.9875 12.5
144-147.995 5
148-150.7875 12.5
150.8-161.995 5
162-173.9875 12.5
When you select "Auto" for a channel or mode's modulation or step, the above values are used
unless you've edited the Band Defaults. Although TV bands are listed, the scanner cannot decode
digital TV audio.

SETTINGS MENUS

To Edit Settings press MENU. Scroll to 'Settings' and press E/
Scroll to the settings and options below (in Blue) and press E/

Set Backlight

Adjust Contrast
See Scanner Info
Adjust Key Beep
Set C-CH Output
P25 LP Filter
% Memory Used
Set Backlight
You can also change the intensity by pressing VOL to toggle your desired level to Off, High,
Middle, or Low. Set the dimmer to Auto if you are going to hard-wire your scanner inside your
vehicle.
1. Scroll to 'Set Backlight' and press E/
2. Scroll to 'Set Dimmer' press E/
Scroll to 1 of 2 options and press E/
3.
For vehicle use - Scroll to 'Auto' and press E/
28
NFM VHF Low
NFM 6 Meter Ham
WFM VHF TV
FM Astronomy
WFM VHF TV
FMB FM Broadcast
AM Commercial Air
NFM Military Land
Mobile
NFM 2 Meter Ham
NFM Military Land
Mobile
NFM VHF High
NFM Federal
Set GPS Format
P25 Threshold
Firmware Version and Serial Number
Set Upside-Down
Set GPS Baud Rate
Disp . Unit ID
Cloning
Scanner Reset
.
.
.
380-399.9875 12.5
400-405.9875 12.5
406-419.9875 12.5
420-449.9875 12.5
450-469.9875 12.5
470-512 12.5
758-787.99375 6.25
788-805.99375 6.25
806-823.9875 12.5
849.0125-868.9875 12.5
894.0125-960 12.5
1240-1300 25
.
.
.
NFM
NFM
NFM
NFM
NFM
NFM
NFM
NFM
NFM
NFM
NFM
NFM