Uniden BCD96P2 Owner's Manual page 88

20. Scroll to 1 of 3 options and press E/
800/900 Standard - The scanner will use the regular old Motorola band plan and return
to the menu.
800Splinter - The scanner will use the regular old Motorola band plan and return to the
menu.
Custom - Allows you to create a custom band plan for rebanded systems.
21. At 'Select Plan' scroll to 'Band Plan 1-6' and press E/
22. At 'Set Base Freq' press E/
23. At 'Input Lower' enter the lower base frequency and press E/
24. At 'Input Upper' enter the upper base frequency and press E/
25. Scroll to 'Set Offset' and press E/
26. At 'Input Offset' enter the offset and press E/
27. At 'Select Polarity' scroll to + or - and press E/
28. Scroll to 'Set Spacing' and press E/
29. Scroll to the step size and press E/
30. Press MENU to return and repeat for each band plan as needed. Press MENU three times
to return.
31. Scroll to Set Record and press E/
32. Scroll to On or Off and press E/
Scroll to Set Audio AGC and press E/
33.
34. Scroll to 'Analog' and press E/
35. Scroll to 'Digital' and press E/
36. Press MENU to return.
37. Scroll to P25 Waiting Time and press E/
38. Set the Wait Time from 0 to 1000 ms and press E/
39. Scroll to Search with Scan and press E/
40. Scroll to Set Quick Key and press E/
(Used for 'Search with Scan' only):
1. Scroll to 0-99 or .No for no quick key and press E/
2. Scroll to Set Startup key and press E/
3. Scroll to 0-9 or .No for no startup key and press E/
4. Scroll to Set Number Tag and press E/
5. Enter 0-999 and press E/
6. Scroll to Set Lockout and press E/
7. (Used for 'Search with Scan' only).
8. Scroll to 'Unlocked', 'Temporary L/O', or 'Lockout' and press E/
9. Scroll to Set Hold Time (the amount of time the search will search in Scan Mode) and press
E/ .
10. Enter the hold time (0-255 seconds) you desire and press E/
search the whole band before continuing).
84
.
.
.
.
.
.
.
.
to save and exit.
. See also Adjust Audio AGC.
to toggle on or off.
to toggle on or off.
.
.
.
.
.
.
.
.
.
.
.
to save and exit.
to save and exit.
to save and exit.
to save and exit. (0 will