Search For - Uniden BCD96P2 Owner's Manual

Set Delay Time this setting determines how long the scanner waits after a transmission ends
before resuming Quick Search and Close Call Search operations. A negative delay will force a
resume after that number of seconds. The default setting is 2 seconds.
1. Scroll to 'Set Delay Time' and press E/
2. Scroll to the desired delay time (-10, -5, -2, 0, 1, 2, 5, 10, or 30 secs.) and press E/
save and exit.
Set Attenuator this setting controls the attenuator for Quick Search, Close Call, and Band Scope
operations. Turn on this setting if you are near other strong signal sources to attenuate about
20dB. Attenuation sometimes helps to reduce interference and desensitization that strong signals
create. The default setting is Off.
1. Scroll to 'Set Attenuator' and press E/
2. Scroll to On or Off and press E/
Note: You can also toggle attenuation for search/close call mode by pressing
7(ATT).
Set Record this setting enables the REC jack for Quick Search and Close Call modes. The
default setting is Off.
1. Scroll to 'Set Record' and press E/
2. Scroll to On or Off and press E/
Set Audio AGC allows you to turn the AGC feature on or off for Quick Search and Close Call
modes. See also Adjust Audio AGC.
1. Scroll to 'Set Audio AGC' and press E/
2. Scroll to 'Analog' and press E/
3. Scroll to 'Digital' and press E/
4. Press MENU to return.
P25 Waiting Time basically gives the scanner time to determine if frequencies have digital or
analog transmissions for Quick Search, Close Call, and Band Scope operations. During this
time, the scanner will evaluate the received signal and, if it detects P25 data, will open squelch
immediately. If P25 is not detected before the delay expires, the scanner will open squelch at
the end of this delay. This is to prevent "false decode" problems (digital noise at the beginning of
transmissions). The default setting is 400 ms.
1. Scroll to 'P25 Wait Time' and press E/
Set the Wait Time from 0 to 1000 ms and press E/
2.
Note: Any analog transmissions will lose the first part of the transmission, up to the wait
time you set here.
SEARCH FOR . . . MENU
Important! There are many options and setting in Search/Close Call Options that affect and
compliment the settings for searching. Please review those first.
Edit Service Search
Service Search
.
.
to save and exit.
.
to save and exit.
.
to toggle on or off.
to toggle on or off.
.
.
Set Search Key
Search and Store
then
Storing a Displayed
Frequency
Reviewing Locked out
Frequencies
to
81