Uniden BCD96P2 Owner's Manual page 31

• Displays the frequency for a conventional channel in Scan Receiving/Hold Modes .
• Displays the receive modulation of the custom/service search in Search Mode .
ATT displays if the search is attenuated in Receiving or Search Modes.
displays the tone code (if received) for a conventional frequency if programmed
and blinks in CTCSS/DCS/NAC search mode in Receiving or Hold Modes.
IFX Displays if intermediate exchange is on for the channel in Function Hold Mode.
Displays the volume offset for the channel in Function Hold Mode
Fourth Line - Display Mode 3
Displays only the trunking activity indicators for a trunked system in Scan, Receiving, or Hold
Modes. Conventional system/search display is the same as Display mode 1.
Fifth Line
S0-9: Displays the first digit of (systems/sites/search assigned to) the currently
scanned quick key on the left with the blinking second digit (1-0) on the right in
Scan/Receiving Modes.
Displays the first digit of the system/site/search quick key assigned to the displayed
channel on the left with the second digit (1-0) on the right in Hold Mode.
• a - (dash) means nothing is assign to the quick key.
• an * (asterisk) means the quick key is turned off.
Displays if the Close Call 'Priority' feature is on in Any Mode except GPS and
Tone-Out.
Displays reversed if the Close Call 'Do-Not-Disturb' feature is on in Any Mode
except GPS and Tone-Out.
SCR
Displays if one or more broadcast/custom screen bands are turned on in
Search/Receiving Modes.
REP Displays if repeater reverse is turned on in Search/Receiving Modes.
Sixth Line
GRP Displays the group quick keys (1-0) for each conventional system/site with
(groups assigned to) the currently scanned quick key blinking in Scan/
Receiving Modes.
Displays the group quick key for the displayed channel in Hold Mode.
• a non-blinking number on the right indicates the quick key is enabled waiting
to be scanned.
• - (dash) means nothing is assigned to the quick key.
• an * (asterisk) means the quick key is turned off.
WX Displays if the weather alert priority feature is on in Any Mode except GPS and
Tone-Out.
GPS Alert information displays if connected to a GPS device and receiving a signal
in Scan or Search Modes.
BAND DEFAULTS
Frequency Step
Range (kHz)
25-27.405 5
27.41-27.995 5
28-29.68 20
Mode Band
AM CB/Business
AM Business/Forest
NFM 10 Meter Ham
Frequency Range Step
(kHz)
174-215.95 50
216-224.98 20
225-379.975 25
Mode
WFM
NFM
AM
27