Keypad And Knob Controls - Uniden BCD96P2 Owner's Manual

KEYPAD AND KNOB CONTROLS

SQ/
Close Call
Knob
VOL/
BACKLIGHT
Knob
Each of the knobs and keys on the BCD996P2 produce several different results depending upon
how you activate them. You can, for example, rotate the knobs as well as press them. Some keys
provide one operation when briefly pressed while pressing and holding a key or knob gives a
different result. Many controls and keys behave differently depending on the mode your radio is in
when you use the key or control.
Key
SQ (Squelch)
VOL, Light
PRI
WX
PRI/WX/GPS/
MENU/L/O
Buttons
• Turn to adjust the squelch.
• Press to toggle Close Call DND, Close Call Priority, or Close
Call Off in Any Mode except Tone-Out and GPS.
• Press and hold to turn on Close Call Only in Any Mode except
GPS.
• Press then SQ to start Fire Tone-Out in Any Mode except GPS.
• The blue light flashes with a Close Call hit.
• The red light flashes once then stays on for a weather alert for
about 3 minutes.
• The red light stays on for a Dangerous Road/Crossing alert until
canceled (locked out).
• Turns the scanner on/off and adjusts the volume.
• Press to toggle through the backlight intensities in Any Mode.
• Press then VOL to view the APCO threshold display in Any
Mode.
• Press to toggle Priority On, Priority Plus, Priority Off in Scan Mode
(at least one conventional priority channel must be assigned).
• Press to toggle Weather Alert Priority on/off in Any Mode except
GPS.
• Press and hold to start Weather Scan in Any Mode except GPS.
• Press to switch to Weather Scan in Weather Alert Mode.
• Press to switch to Weather Alert in Weather Scan Mode.
SCAN/
FUNCTION SEARCH
Knob Knob
HOLD/
RESUME
Knob
Function
19