Uniden BCD96P2 Owner's Manual page 49

1. Press MENU.
2. At 'Program System' press E/
At 'Select System' scroll to 'New System' and press E/
3.
4. At 'Select Sys Type' scroll to 'EDCS' and press E/
5. Scroll to 'WIDE/NARROW' or 'SCAT' and and press E/
6. At 'Confirm?' press E/
Note: EDACS Wide is the same as EDACS Standard and use a 9600 baud control channel.
EDACS Narrow-band systems use a 4800 baud control channel. RadioReference has a
description of SCAT.
At 'Edit Name' press E/
7.
8. Scroll to 'Edit Sys Options' and press E/
Continue at 'Set Number Tag' below. Then see Creating Sites. Then see Creating Groups. Then
see Programming Frequencies/IDs.
To Create a New LTR System:
1. Press MENU.
2. At 'Program System' press E/
3. At 'Select System' scroll to 'New System' and press E/
4. At 'Select Sys Type' scroll to 'LT' and press E/
5. At 'Confirm' press E/
6. At 'Edit Name' press E/
7. Scroll to 'Edit Sys Options' and press E/
Continue at 'Set Number Tag' below. Then see Edit Site Options. Then see Creating Groups.
Then see Programming Frequencies/IDs.
To Edit Trunking Systems Options:
1. Press MENU.
2. At 'Program System' press E/
3. At 'Select System' scroll to the system that you want to edit and press E/
4. Scroll to 'Edit Sys Option' and press E/
5. Scroll to the options below and press E/
6. At 'Edit Name' press E/
7. Press SCAN/SEARCH to return to scanning when done with editing .
Note: Not all options will appear for EDACS SCAT and LTR systems.
Set Number Tag
ID Scan/Search (no
EDACS SCAT)
Set Delay Time
.
.
. See Entering Text.
.
.
.
. See Entering Text.
.
.
.
.
. See Entering Text.
Set Status Bit (Motorola only)
Set End Code (Motorola only)
Edit Fleetmap (Motorola Type
I/IIi only)
Emergency Alert (Moto/
EDACS W/N only)
.
.
.
.
.
Rvw ID:Srch L/O (no EDACS
SCAT)
Clr All L/O IDs (no EDACS SCAT)
Set Audio AGC
.
45