In Tone-Out Standby Mode; In Tone-Out Search Mode; Key-Safe Mode - Uniden BCD96P2 Owner's Manual

While scanning, press
Or, Press MENU. Scroll to 'Tone-Out for...' and press
Scroll to 'Tone-Out Standby' and press
You can also assign Tone-Out to a Search Key.
The display will show the Tone-Out name, channel number (1-10), and tone settings. Any
transmission received on the frequency will not be heard but you will still see the signal strength
bars.
All Tone-Outs (channels) that have the same frequency (and modulation and attenuation) as the
one you select will also (and only) be monitored so you can monitor up to 10 Tone-Out channels
for one frequency. In this case, the scanner displays each Tone-Out channel for two seconds. It
does not scan them; Tone-Out monitors the frequency for all Tone-Out channels with the same
frequency. Regardless of the current display, the scanner will alert on any received tone out that
matches a stored setting (channel) for the frequency.
If you press HOLD while in 'Standby/Search' mode, the scanner temporarily exits and you will be
able to hear any transmissions on that frequency. No alerts sound, even if a Tone-Out matches
one you have programmed in hold mode. Press HOLD again to return to 'Standby/Search' mode.

In Tone-Out Standby Mode

1. To select another Tone-Out turn the scroll control.
2. To turn Intermediate Frequency Exchange on or off press
3. To turn the attenuation on or off press
4. To toggle the modulation press

In Tone-Out Search Mode

1. To select another Tone-Out turn the scroll control.
2. To save found tones in Tone-Out Search mode press E/
3. To turn Intermediate Frequency Exchange on or off press
4. To turn the attenuation on or off press
5. To toggle the modulation press

Key-Safe Mode

This mode prevents accidental programming changes and prevents anyone from changing
modes. Some keys don't work in this mode. SQ, Vol/Light, the scroll control (
and Hold/Resume all still work in their primary functions. The scanner only operates in one mode;
the mode the scanner was in when the radio was last turned off. So, if you turned the scanner off
in Close Call mode and turn it back on in Key-Safe mode, that's the mode it will be in.
then 'SQ'.
.
then 7(ATT).
then 9(MOD).
then 7(ATT).
then 9(MOD).
.
then 4(IFX).
at 'Save Found Tones?'.
then 4(IFX).
), Function Mode,
97