Uniden BCD96P2 Owner's Manual page 25

Key
Number Keys • Enter any 3-digit channel number tag then MENU to access a
channel in the current system in Scan Hold Mode.
• Enter any 3-digit system number tag then .No then any 3-digit
channel number tag then MENU to access a channel in another
system in Scan Hold Mode.
• Enter any frequency/ID then Hold to go directly to in Scan/Search
Hold Modes.
• Press 0-9 to toggle single-digit system/site/search quick keys on or
off in Scan Mode.
• Press 0-9 to toggle custom searches on or off in Search Mode.
• Press 1-7 to toggle Close Call bands on or off in Close Call Only
Mode.
• Press 4 to move the cursor to the left when editing text.
• Press 6 to move the cursor to the right when editing text.
• Press then 0-9 to toggle group quick keys on or off in Scan
Mode.
• Press then 1(Srch 1), 3(Srch 3) to turn search keys on in Any
Mode except GPS.
• Press then 4(IFX) to toggle intermediate frequency exchange
for a channel/frequency in Scan/Search/Weather Hold Modes.
• Press then 5(LVL) to toggle the volume offset for a channel in
Scan Hold Mode.
• Press then 6(DISP) to toggle display modes (1, 2, or 3) in Scan
Hold Mode.
then 7(ATT) to toggle the attenuator on/off for a
• Press
conventional channel in Scan Hold Mode.
• Press then 7(ATT) to toggle the attenuator on/off for a trunked
site in Scan Hold Mode.
• Press then 7(ATT) to toggle the attenuator on/off in Search/
Close Call Only/Tone-Out/Weather Modes.
• Press then press and hold 7(ATT) to toggle global attenuation
on/off in Any Hold Mode except GPS.
• Press then press and hold 8(REV) to view the repeater
frequency in Scan/Search/Close Call Only Hold Modes.
• Press then press 9(MOD) to toggle the modulation for a
conventional channel in Scan Hold Mode.
• Press then press 9(MOD) to toggle the modulation for a search/
Close Call/Tone-Out in Search Mode.
Function
21