Selecsng Nasonwide Systems; Customizing Your Monitoring Experience - Uniden HomePatrol-2 Owner's Manual

Selecting Nationwide Systems
Some systems contain informaSon about common channels used naSonwide. Systems like this include
Railroad frequencies, GMRS and FRS frequencies, and more. To enable these systems:
1. Tap the following:
Menu
•
Advanced Menu
•
Select NaSonwide Systems
•
2. The list of naSonwide systems displays. Scroll through entries, tapping UP or DOWN to change
pages. Tap on the naSonwide systems you want to monitor. Selected entries turn orange.
Customizing Your Monitoring Experience
HomePatrol-2 has many opSons that you can set according to your own preference. You can decide how
bright the screen will display, how loud screen taps are, and how long default Sme is when you tap
Mute. You can also set the defaults for instant replay length and automaSc shutoff.
No single menu lets you adjust all se]ngs at one Sme. You access these se]ngs individually. Many,
however, are found in the Menu and Advanced Menu. The following table provides a quick guide to
these se]ngs and how to access them. Detailed informaSon for select operaSons follows the table.
To set this...
Location
Service Type
Audio Options
Tap this...
Menu/Set Your Location
Menu/Select Service
Types
Menu/Audio Options
Then tap...
Enter Zip Code
Enter City
Auto Locate
Manual Location Input
Set Up GPS
Set Range
Save Location
Review Location/Use Location
Service types you want to monitor.
Audio AGC – tap for On/Off
Screen Tap – tap for Off/Auto/Soft/ Loud
13