Chart Settings - Standard Horizon CPF180i Owner's Manual

1
ROAD
2
POINT OF INTEREST (LIBRARY)

12.0.8 Chart Settings

Settings that control how the chart features will be shown on the Chart page of the GPS
Chart Plotter.
Lat/Lon Grid : Turns the displaying of the Latitude and Longitude grid lines on or off on the chart page. See the
figure below:
Lat/Lon Grid ON
Chart Boundaries : Turns the displaying of Chart Boundaries On, Off or Auto. The Chart Boundaries are the "ticked"
boxes sourround the coastline. Each box indicates an area where more detail is available. The
Chart Boundaries are only show when a C-MAP B
into the GPS Chart Plotter. See the figure below:
Chart Boundaries ON
Value Added Data : Turns the displaying of Value added data On or Off. The Value Added Data (VAD) is a collection
of additional cartographic objects which are not present on the original paper chart (from which
the electronic chart derives). These objects have been obtained from other sources and then
merged to the electronic charts in order to provide more information useful for the navigation. VAD
object can be any cartographic objects and it can be distinguished from the official-chart-objects
from the Quick Info. A dedicated icon is shown on the Quick Info window to indicate that the object
Page 92
1
2
Figure 12.0.7 - Example of Roads and Points Of Interest
Lat/Lon Grid OFF
+
J NT, NT or MAX CARD is inserted
Y EPPESEN
Chart Boundaries OFF
CPF180i and CPF300i
R