Man Over Board (Mob) Function; Placing A Mob Point; Deleting A Mob Point - Standard Horizon CPF390i Owner's Manual

8.

MAN OVER BOARD (MOB) FUNCTION

During navigation, the "MOB" feature provides a one-touch method of storing a location,
such as a point were a crew member fell overboard. In this mode, the CP380i or CPF390i
places a MOB point on the Chart page and all the navigation data shown is related to
navigating back to this point, allowing you to retrace your path to the MOB point efficiently.
8.0

PLACING A MOB POINT

1. On the Chart page, press [MOB] to start navigating back to the point.
2. You will notice a MOB Mark will be on the Chart page and all navigation is referring back
to this point.
3. If the cursor is moved over the MOB Icon, the popup windows over Soft Keys will be
shown allowing quick access to the Highway or Navigation page, or to Route Check.
4. To stop navigating to the MOB point, press [GOTO], select STOP and press [ENT].
8.1

DELETING A MOB POINT

1. Move the ShuttlePoint knob until the cursor is over the top of the MOB icon.
2. Press [D ], a popup window will be shown to confirm deleting the MOB point.
ELETE
3. Move the ShuttlePoint knob to highlight YES and press [ENT].
CP390i and CPF390i
Figure 8.0 - MOB point
WAAS 3D
Figure 8.1 - Deleting MOB point
WAAS 3D
WAAS 3D
Page 75