Accessories Included; Recommended Accessories - Hameg HMP Series User Manual

HMP2020 10 A: <500 mA: <0,05 % + 0,5 mA, typ. ±0,5 mA;
≥500 mA: <0,05 % + 2 mA, typ. ±2 mA
5 A: <500 mA: <0,05 % + 0,5 mA, typ. ±0,2 mA;
≥500 mA: <0,05 % + 2 mA, typ. ±1 mA
Residual ripple:: 3 Hz...100 kHz; 3 Hz...20 MHz
<150 µV
Voltage:
<250 µV
Current <1 mA
Residual deviation after a load change (10 to 90 %):
Voltage: <0.01 % + 2 mV
Current: <0.01 % + 250 µA
Residual deviation after a line voltage change (±10 %):
Voltage: <0.01 % + 2 mV
Current: <0.01 % + 250 µA
Recovery time after a load
step from 10 to 90 % for
return within a ±10 mV
<1 ms
window:
Arbitrary function EasyArb
Parameters of points: Voltage, current, time
Number of points: 128
Dwell time: 10 ms to 60 s
Repetition rate: Continuous or burst mode with
1 to 255 repetitions
Trigger: Manually via keyboard or via interface
Maximum ratings
Reverse voltage: 33 V max.
Reverse polarized voltage: 0.4 V max.
Max. permitted current in
case of reverse voltage: 5 A max.
Voltage to earth: 150 V max.
Miscellaneous
Temperature coefficient /°C:
Voltage: 0.01 % + 2 mV
Current: 0.02 % + 3 mA
Display:
HMP4030 / HMP4040 240 x 128 pixel LCD (full graphical)
HMP2020 / HMP2030 240 x 64 pixel LCD (full graphical)
Memory: Non volatile memory for 3 arbitrary
functions and 10 device settings
Interface: Dual interface USB/RS-232 (HO720)
Processing time: <50 ms
Protection class: Safety class I (EN61010-1)
Power supply: 115/230 V±10 %; 50 to 60 Hz, CAT II
Mains fuses 115 V: 2 x 10 A slow blow 5 x 20 mm
HMP4030 / HMP4040: 230 V: 2 x 5 A slow blow 5 x 20 mm
Mains fuses 115 V: 2 x 6 A slow blow 5 x 20 mm
HMP2020 / HMP2030: 230 V: 2 x 3.15 A slow blow 5 x 20 mm
Power consumption:
HMP4030/HMP4040 550 VA max.
HMP2020/HMP2030 350 VA max.
Operating temperature: +5...+40 °C
Storage temperature: -20...+70 °C
Rel. humidity: 5...80 % (non condensing)
Dimensions (W x H x D):
HMP4030 / HMP4040 285 x 125 x 365 mm
HMP2020 / HMP2030 285 x 75 x 365 mm
Weight:
HMP4030 / HMP4040 approx. 10 kg
HMP2020 / HMP2030 8.5 kg
typ.; 1,5 mV typ
rms rms
rms
rms

Accessories included:

Line cord, operating manual, CD, software

Recommended accessories:

HO730 Dual interface ethernet/USB
HO740 Interface IEEE-488 (GPIB), galvanically isolated
HZ10S 5 x silicone test lead (measurement connection
in black)
HZ10R 5 x silicone test lead (measurement connection
in red)
HZ10B 5 x silicone test lead (measurement connection
in blue)
HZ13 Interface cable (USB) 1.8 m
HZ14 Interface cable (serial) 1:1
HZ42 2RU 19" rackmount kit
HZ72 GPIB-cable 2 m
HZP91 19" rackmount kit 4RU
Specifications
41