General remarks regarding the CE marking All signal connections must be shielded (e.g. coax such as RG58/U). HAMEG measuring instruments comply with the EMI norms. Our tests With signal generators double-shielded cables are mandatory. It is for conformity are based upon the relevant norms. Whenever different especially important to establish good ground connections.
C o n t e n t Declaration of conformity General remarks regarding the CE marking Triple Power Supply HM7042-5 Specifi cations Control Elements Layout and circuit diagramms Subject to change without notice...
Page 4
H M 7 0 4 2 - 5 T r i p l e P o w e r S u p p l y H M 7 0 4 2 - 5 2x 0-32 V/ 0-2 A 0-5.5 V/0-5 A Separate voltage and current displays for each output: 4 digits at channel I+III;...
C o n t r o l E l e m e n t s VOLTAGE Adjustment of output voltage Control Elements 0...5.5 V CURRENT Adjustment of current limit I Front Panel both current limit and electronic fuse threshold VOLT Voltage display AMP.