Table of Contents
Advertisement
Figure 4-18: Dual USB Cable Connection
Step 4:
Attach the bracket to the chassis. The USB 2.0 connectors are attached to a
bracket. To secure the bracket to the chassis please refer to the installation
instructions that came with the
4.7 External Peripheral Interface Connection
The following external peripheral devices can be connected to the external peripheral
interface connectors.
RJ-45 Ethernet cable connectors
USB devices
VGA monitors
To install these devices, connect the corresponding cable connector from the actual
device to the corresponding PICOe-HM650 external peripheral interface connector
making sure the pins are properly aligned.
Page 66
PICOe-HM650 Half-size PCIe CPU Card
chassis.Step 0:
Advertisement
Table of Contents
