Permobil C400 Service Manual page 32

Seat lift
Electric Seat Lift
Disconnection
1. Remove the ICS General Module from the
chassis. It is fitted with one screw - see figure.
2. Disconnect the contacts on the seat lift cabling
to the ICS General Module - see figure below.
Connection
1. Connect the seat lift cabling to the ICS General
Module - see figure below.
2. Fit the ICS General Module to the chassis
using the appropriate screw - see figure.
Connection of the seat lift to the ICS General Module.
The ICS General Module is fitted with one screw.
32
Connected to the
ICS Master Module
Connected to
the seat lift