Shock Absorbers
Shock Absorbers
Removal
1. Switch off the main power switch on the control
panel.
2. Remove the front fender on the side in
question, see page 7.
3. Lift up and chock up the wheelchair chassis
so that the wheel in question is free of the
ground.
4. Loosen the shock absorbers front end. It is
fitted with a bolt, two washers and a nut, see fig.
5. Loosen the shock absorbers rear end. It is
fitted with a bolt, two washers and a nut, see fig.
Fitting
Fit the shock absorber in the reverse order. Adjust
the shock absorbers spring force before fitting,
see page 17.
Shock absorber
The shock absorber is fitted with a bolt,
two washers and a nut.
16