Wheel Forks - Permobil C400 Service Manual

Wheel Forks

Wheel Forks
Removal
1. Switch off the main power switch on the control
panel.
2. Lift up and chock up the wheelchair chassis
so that the wheel in question is free of the
ground.
3. Remove the cap from the top of the link arm.
See fig.
4. Remove the wheel fork. It is fitted with one
screw from above, see fig.
Fitting
Fit the wheel fork in the reverse order.
Use a torque wrench to
tighten the bolt to 24Nm.
m
CAUTION
Do not use a Pneumatic impact wrench.
m
WARNINg
The bolt must be used once only. Removed bolt is not
allowed to be refitted.
Other types of bolts or washers are not to be used.
Do not use any other type of thread lock.
Pos.
1 Plastic plug
2
Bolt, ISO 4017 M8x16 8.8 Fe/Zn 5 C1/
Locking coat DIN 267-28
3
Washer, 8.5x23x3
4 Bearing 6002-2RS1, 15x32x9
5
Circlip DIN472, Ø32
14
1
2
3
6
Wheel fork
Description
5 4