Lights
Lights
(Accessories)
Removing the front lights
1. Switch off the main power switch on the control
panel.
2. Put the circuit breaker in the "OFF" position. It is
accessed through a hole in the chassis cover;
see page 43.
3. Remove the seat elevator cover, chassis cover
and the front fender on the side in question,
see page 7.
4. Disconnect the electrical connection of the front
light in question, it´s positioned on the front light
cabling on the inside of the chassis.
5. Clip the cable ties that hold the cable.
6. Remove the Cable pass-through on the front
fender in question.
7. Remove the front light in question. It is attached
with three screws; see fig.
Fitting
Fit the front light in the reverse order.
The front light is attached with three screws.
44
Front lights