Esp Module - Permobil C400 Service Manual

ESP Module

ESP module
Removal
1. Raise the seat lift to its highest position.
To raise the seat on a chassis with a fixed
seat tube, see page 36. To raise the seat
on a chassis with an electric seat lift that
does not work normally because the batteries
are discharged or the adjustment device is
defective, see page 28.
2. Switch off the main power switch on the
control panel.
3. Remove the seat lift cover and chassis cover -
see page 7.
4. The ESP module is fitted at the very front of
the chassis. Remove the cable from the ESP
module by pulling it straight out - see figure.
5. Remove the ESP module's bracket, which is
held in place by two screws - see figure.
6. Remove the ESP module, which is held in
place by four screws - see figure.
Disconnecting the cable from the ESP module.
The ESP module's bracket is held
in place by two screws.
The ESP module is held in place by four screws.
40