Checking The Print Image Prior To Making Master [Preview] - Riso 590 User Manual

Ez series

Table of Contents

Checking the Print Image Prior to Making

Master

[Preview]

You can check what the actual master will look like by previewing an image of the scanned original or an image of

data sent from a computer. This function is handy for checking the layout or final image of a Multi-Up job.

The operation and display timing differ depending upon the mode.

Mode name

(original type)

Printing from the Original

Document

Scan Mode

Printing Original Data

from a Computer

Retrieving Storage Data/

USB Flash Drive data

and printing

Note:

• Preview shows an image oriented towards output after printing.

• It shows the scanned original as-is. A margin is required when actually printing. Check to make sure that the mar-

gins are sufficient.

• In "Direct Print" operation, [Preview] will be displayed on the Master Making Basic Screen when data is received

from the computer.

p.43

When set

When setting functions

related to Master Making

(settings from Functions)

When setting functions

(master making functions)

related to Scanning (setting

from Functions)

Stopping the print job prior to

making a master (Semi-

Auto(Print)/Auto Process

OFF), after the machine has

received the original data

When retrieving storage

data/USB Flash Drive data

(set on the Storage Mode

Basic Screen).