Replacing The Print Drum (Cylinder) (Color (Colour) Change); Removing The Print Drum (Cylinder) - Riso 590 User Manual

Replacing the Print Drum (Cylinder)
(Color (colour) Change)
When replacing with a Color Drum (Cylinder) to change colors (colours), or when removing jammed paper, follow the
steps to remove Print Drum (Cylinder). Be sure to use a Color Drum (Cylinder) specifically designed and approved
for use with this machine.
B
Caution:
• Do not stand the Print Drum (Cylinder) upright. Doing so may stain the floor, etc.
Important!:
• Use only Print Drums (Cylinders) specifically designed and approved for use with this machine.
• Keep the power ON while removing or replacing the Print Drum (Cylinder).
• Make sure to place the changed Print Drum (Cylinder) into the drum (cylinder) case and store horizontally.

Removing the Print Drum (Cylinder)

1
Open the Front Cover.
2
Check that the indicator of the Print
Drum (Cylinder) Release Button is
ON.
Print Drum
(Cylinder)
Release Button
If the indicator is off, press the Print Drum (Cylin-
der) Release Button to turn it on.
Important!:
• When the Master Making Unit is out, the Print
Drum (Cylinder) cannot be pulled out. Return
the Master Making Unit into position and press
the Print Drum (Cylinder) Release button.
p.202
3
Pull out the Print Drum (Cylinder).
Print Drum (Cylinder)
Handle
Grasp the Print Drum (Cylinder) Handle and
slowly pull until the Print Drum (Cylinder) is com-
pletely extended.

Replacing the Print Drum (Cylinder) (Color (colour) Change)

Replacing Consumables
209