Printing From A Paper Document Or Book - Riso 590 User Manual

Printing from a Paper Document or Book

The steps for scanning an original for printing is explained below.
1
Make sure the machine is ON.
Ready to Make Master
Basic Selections Functions Admin.
Page (A4) Contrast Size Paper
Auto
L i n e
A4
Dot Reserva- Multi-Up
Process tion Print Editor
Black Id l e In fo
Check the Control Panel.
Note:
• When the power is OFF, both the Display and
the key are off. Turn the power ON.
p.32
• If the key is lit, the machine is in Energy
Saving mode. Press the
Energy Saving mode.
2
Check for printing paper.
Make sure paper is loaded.
To load or to change the paper, see the following
page:
p.32
After replacing with paper of a different size,
adjust the position of the Receiving Tray Paper
Guides and Paper Stopper.
p.35
3
key to cancel
Check the Display.
The initial screen differs depending on the setting
of "Display Priority" of "Admin.".
• If current screen is in Mode Selection, touch
[MasterMake] to switch to the Master Making
Basic Screen.
Select an Operation Mode
RISO EZ570A
MasterMake
P r i n t i n g
The following screen appears.
Ready to Make Master
Basic Selections Functions
Image Contrast Size
Auto
Li n e
Dot
Reserva- Multi-Up
Process
tion Print
Black
Id le
• Make sure either the Master Making Basic
Screen or Print Basic Screen is displayed, and
go to step 4.
Note:
• When you see [Data-Map] in the Status Area,
the machine is busy receiving electronic data
from the computer. Please wait a moment.
• When the following screens are displayed, fol-
low the message on the screen.
For details, see p.42.
Printing from a Paper Document or Book
Basic Operations
Admin.
Paper
A4
Editor
In fo
37