Customizing The Direct Access Area [My Direct Access] - Riso 590 User Manual

Advanced Features
Customizing the Direct Access Area
Access]
Normally, the functions displayed in the Direct Access Area of the Basic Screen are already registered by default set-
ting or changed by the administrator. However, if User Management is set up, each user can register the functions
displayed in the Direct Access Area using "My Direct Access".
The functions that can be displayed in the Direct Access Area can individually be registered in each mode (Master
Making/Print/Scanning).
Up to 4 functions can be registered.
"My Direct Access" kept by each user can be displayed after the user has been identified and cannot be changed by
other users.
Important!:
• "My Direct Access" can be set when "Management Level" is set to "High/Full Management" in "User Management".
Note:
• If "My Direct Access" is not set, the functions registered via the usual methods are displayed in the Direct Access
Area. ( p.171)
1
Touch [Functions] on the Basic
Screen for each mode.
Ready to Make Master
Basic Selections
Image Contrast
Line
Dot
Reserva-
Process
Black
158

Customizing the Direct Access Area [My Direct Access]

Ready to Make Master
Basic
Image
Li n e
Dot
Process
Black
Direct Access Area
Functions Admin.
Size Paper
Auto
A4
Multi-Up
Editor
tion Print
Idl e I nf o
Selections Functions Admin.
Contrast Size Paper
Auto
A4
Reserva-
Multi-Up
Editor
tion
Print
Idl e In fo
2
Touch [My Direct Access].
Ready to Make Master
Basic Selections
Special Paper Ctrl
Job Separation
Special Paper Ctrl
Jump Wing Control
ID Counter Report Editor
If "Management Level" is not set to "High/Full Man-
agement" in "User Management", the [My Direct
Access] button is grayed-out and is not available.
[My Direct
Functions Admin.
My Direct Access
P . 4/4