Customizing The Default Settings - Riso 590 User Manual

Advanced Features

Customizing the Default Settings

The default settings can be changed when the machine is not in operation.
Make sure there is no pending or current Print Job operation.
Note:
• If the administrator is registered in User Management, only the administrator can change the [Admin.] settings.
(This operation requires input of the administrator's PIN code or connection of the registered USB Flash Drive.)
See p.104
• On the Admin. screen, the current setting is displayed on the right side of each button.
1
Touch [Admin.] on the Basic Screen
for each mode.
Ready to Make Master
Basic Selections
Image Contrast
L in e
Dot Reserva-
Process
Black
2
Touch [OK].
Ready to Make Master
Basic Selections
R e s e t s c u r r e n t s e t t i n g s
o n c e o p e n e d
Note:
• When an administrator is registered in User
Management, the Recognition Screen is dis-
played.
Operate the screen to log in as the administra-
tor. If already identified as the administrator, the
Recognition Screen will not be displayed.
Users other than administrator are prohibited.
168 Changing Default Settings [Admin.]
Functions Admin.
Size Paper
Auto
A4
Multi-Up
Editor
tion
Print
Idl e I nf o
Functions Admin.
OK
When "Recognized by" is set to
"PIN code"
Input the administrator's PIN code using the
Print Quantity Keys and touch [OK].
Input the PIN code
OK
When "Recognized by" is set to
"USB Flash Drive"
Connect the administrator's registered USB
Flash Drive to the USB slot.
Insert the registered
USB flash drive
The Admin. screen is displayed once access
has been identified.