Usb Flash Drive - Riso 590 User Manual

3
Touch an unused button.
Create User
Select a Register Frame for a Button
Register
0 Admin
Change
1 U-1
Clear
2 U-2
3 U-3
4 U-4
Unused buttons are displayed with a solid line.
Used buttons are grayed-out and are not avail-
able. (Another user has been registered.)
Important!:
• Be sure to register the administrator first.
• If the administrator is not registered, buttons are
not available except "0 Admin".
• The "0" button is only available to the adminis-
trator. Even if you rename this button, it will be
treated as the administrator.
4
Input the PIN code or connect the

USB Flash Drive.

When "Recognized by" is set to
"PIN code"
Input the PIN code using the Print Quantity
Keys.
Register
Rename U-1
Group OFF
Limit OFF
Disable OFF
Up to 8 digits can be input.
Press the key to clear the PIN code.
Close
5 U-5
6 U-6
7 U-7
8 U-8
9 U-9
P .1/10
Cancel OK
Input the PIN code
00000000
(1-8 digits)
When "Recognized by" is set to
"USB Flash Drive"
Connect the registered USB Flash Drive to the
USB slot.
Register
Rename U-1
Group OFF
Limit OFF
Disable OFF
The number that identifies the registered USB
Flash Drive is displayed.
Note:
• If you register multiple USB Flash Drives, we
recommend that you ready them to be distin-
guished later (for example, put a user name
on the USB Flash Drive).
• If you input the assigned PIN code ("Recog-
nized by": PIN code) or connect the USB
Flash Drive that you already registered
("Recognized by": USB Flash Drive), the fol-
lowing message is displayed when touching
[OK].
This is already registered
Try another
Close
Touch [Close] and input the unassigned
PIN code or connect the unregistered USB
Flash Drive.
5
Set various settings.
Set the following settings if needed.
• Rename ( p.113)
• Group ( p.114)
• Limit ( p.115)
• Disable ( p.116)
Setting Up User Management [User Management]
Advanced Features
Cancel OK
Insert the registered
USB flash drive
1
111