Adjusting chain tension
9
Make sure ground is level and
firm and park motorcycle.
118
z
Loosen quick-release axle
nut 1.
Loosen lock nuts 3 on left and
right.
Adjust chain tension with ad-
justing screws 2 on left and
right.
Checking chain tension
(
117).
Make sure that the same scale
value 4 is set on the left and
right.
Tighten locknuts 3 on left and
right with appropriate torque.
Locknut of drive-chain
tensioning screw
14 lb/ft (19 Nm)
Tighten quick-release axle
nut 1 to appropriate torque.
Rear-wheel quick-release
axle in swinging arm
Thread-locking compound:
Mechanical screw lock
74 lb/ft (100 Nm)
Checking chain wear
Engage 1st gear.
Turn rear wheel in driving di-
rection.
Chain is pre-tensioned.
Determine chain elongation A
over 16 rivets 1.