Charging Your Receiver Battery From A Windows Compatible; Computer - Dexcom G4 Platinum User Manual

4. Plug the micro USB end of the cable into the receiver USB port.
Keep the USB port cover on the receiver closed whenever the USB
cable is not attached.
5. The battery charging screen will show on
the receiver.
6. After a few seconds the trend graph will
show with the battery charging symbol (
in the upper left corner.
4.1.2 CHARGING YOUR RECEIVER BATTERY
FROM A WINDOWS COMPATIBLE COMPUTER
You must install the Dexcom STUDIO software to charge your
receiver from a computer. Please see the Dexcom STUDIO
installation card for driver installation instructions.
1. Plug the included USB cable into your computer.
2. Plug the other end of the USB cable into the receiver.
Dexcom G4 PLATINUM (Pediatric) System User's Guide
Battery charging screen
)
Battery charging symbol
in upper left corner of
trend graph
| 39