Charging Your Receiver Battery From A Windows Compatible Computer - Dexcom G4 PLATINUM User Manual

1. Plug the included USB cable into the AC power adapter.
2. Plug the AC power adapter into an AC power outlet.
3. Slide open the USB port cover on the side of the receiver to reach the port. Press down firmly with your
thumb when sliding open the USB port cover.
4. Plug the micro USB end of the cable into the receiver USB port.
Keep the USB port cover on the receiver closed whenever the USB cable is not attached.
5. The battery charging screen will show on the receiver.
6. After a few seconds the trend graph will show with the battery charging symbol ( ) in the upper left
corner.
4.1.2 CHARGING YOUR RECEIVER BATTERY FROM A WINDOWS
COMPATIBLE COMPUTER
You must install the Dexcom Studio software to charge your receiver from a computer. Please see
the Dexcom Studio installation card for driver installation instructions.
1. Plug the included USB cable into your computer.
2. Plug the other end of the USB cable into the receiver.
3. The battery charging screen shows on the receiver.
20