Removing A Sensor - Dexcom G4 Platinum User Manual

11
6-hour Replace Sensor 2-hour Replace Sensor
30-minute Replace Sensor Replace Sensor
end of session
You can set these alerts with the profiles setting (see Chapter 9, Section
9.3.2, Alert Profile Details, "All Other Alerts"). After the 6-hour, 2-hour,
and 30-minute reminders, you continue to receive sensor glucose
readings. Press SELECT to clear these screens. You must remove your
sensor after the Replace Sensor Now screen (00:00:00) shows.
Sensor glucose readings do not show
on the receiver after your sensor
session ends. The trend graphs show
that the sensor session has ended with a
red stoplight symbol at the top.
You must remove your sensor and insert a
new sensor.
Trend graph with
red stoplight in upper right

11.2 REMOVING A SENSOR

128 | Dexcom G4 PLATINUM (Pediatric) Continuous Glucose Monitoring System