Registering Ip Telephones - Panasonic KX-TDE100 Getting Started

4.3.2

Registering IP Telephones

After the programming of the IPCMPR card and IP telephone is finished, the IP telephone must be
registered to the PBX. This is done using the Maintenance Console.
Registration of IP-PTs
Once the IP-PT is successfully registered, the status of the IP-PT will update to show "Registered".
4.3 Programming the Virtual Extension Card and IP Telephones
1. a.
Under Configuration, click Slot.
b.
Move the mouse pointer over the white PBX image of
IPCMPR Virtual Slot at the bottom of the screen.
c.
Click Select Shelf.
d.
Move the mouse pointer over the V-IPEXT32 card
(Virtual 32-Channel VoIP Extension Card). A menu
will be shown under the mouse pointer.
e.
Click Port Property.
2. Click Registration.
A dialogue box will appear. Non-registered (available)
extension numbers are displayed on the left.
3. a.
Highlight numbers and click the right arrow to select
them for registration.
b.
Click Next. A screen will appear with information on
the current IP-PT extension number and index
number for programming.
Notes
• If the IP-PT has been connected to the LAN and
power has been turned on, the IP address of the
IPCMPR card will be assigned automatically.
• If not, connect the IP-PT to the LAN and turn the
power on within 5 minutes after this operation is
done. The IP address of the IPCMPR card will
then be assigned automatically.
c.
Click Next.
• If the registration is still in progress, the dialogue
box will show "Waiting for IP-PT to register...".
Click OK.
• If the registration is successful, the dialogue box
will show "Registration succeed". If there are
more IP-PTs to be registered, click Continue to
resume or Cancel to terminate the registration. If
not, click Close.
Getting Started for Virtual IP Cards 49