Develop ineo+ 25 User Manual page 85

[TRAY MAP-
PING]
[DUPLEX]
[COPIES]
[COLLATE]
PS/PCL PRINT Menu
[TRAY MAPPING
MD.]
[LOGICAL TRAY0] -
[LOGICAL TRAY9]
Settings [ON] / [OFF]
Select whether or not the Tray Mapping
function is used.
Settings [PHYSICAL TRAY1] /
[PHYSICAL TRAY2] /
[PHYSICAL TRAY3]
Select the tray that is used for printing
when a print job is received from
another manufacturer's printer driver.
The default settings are [PHYSICAL
TRAY1] for [LOGICAL TRAY1] and
[PHYSICAL TRAY2] for other trays.
d
[PHYSICAL TRAY3] appears only
if an optional Lower Feeder Unit
PF-P09 is installed.
Settings [OFF] / [LONG EDGE] /
[SHORT EDGE]
If [LONG EDGE] is selected, the pages
will be printed on both sides of the
paper for long-edge binding.
If [SHORT EDGE] is selected, the pages
will be printed on both sides of the
paper for short-edge binding.
The setting specified in the printer
driver will override this menu setting.
Settings 1-9999 (Default: [1])
Specify the number of copies to be
printed.
The setting specified in the printer
driver will override this menu setting.
Settings [ON] / [OFF]
Select whether or not to enable collated
(sort) printing.
The setting specified in the printer
driver will override this menu setting.
2-59