Replacing An Imaging Unit - Develop ineo+ 25 User Manual

Replacing an Imaging Unit

When replacing an imaging unit, refer to the following table. For optimum
print quality and performance, use only approved DEVELOP imaging units
for your specific machine type, as listed in the table below. You can find your
machine type and the imaging unit part numbers on the consumables reor-
der label inside the front cover your machine.
Imaging Unit Type
Imaging Unit Black IUP14K
Imaging Unit Yellow IUP14Y
Imaging Unit Magenta IUP14M
Imaging Unit Cyan IUP14C
Note
Do not touch the OPC drum
surface. This could lower image
quality.
You are advised to replace the indicated imaging unit when the message
[I-UNIT END REPLACE X] (where "X" indicates the color of the imaging unit)
appears.
1
Check the message window to see which color imaging unit needs
replacing.
8-10 Replacing Consumables
Imaging Unit
Parts Number
A0WG13J
A0WG18J
A0WG1EJ
A0WG1KJ