Develop ineo+ 25 User Manual page 292

Symptom
Media is
wrinkled.
Data was
sent to the
machine, but
it doesn't
print.
The hard
disk was
automati-
cally format-
ted.
The Com-
pactFlash
card was
automati-
cally format-
ted.
10-32
Cause
The media is moist
from humidity or hav-
ing water spilled on
it.
The media feed roller
or fuser unit is defec-
tive.
Unsupported media
(wrong size, thick-
ness, type, etc.) is
being used.
An error message is
displayed in the mes-
sage window.
A job may be can-
celled if user authen-
tication setting is
specified.
The hard disk was
full.
The CompactFlash
card was full.
Solution
Remove the moist media and replace
it with new, dry media.
Check them for damage. If necessary,
contact Technical Support with the
error information.
Use DEVELOP-approved media. See
"Specifications" on page 3-2.
Handle according to the message dis-
played.
Click the User Authentication button in
the printer driver, and then type in the
necessary information before printing.
Delete print jobs and resources (fonts,
forms, etc.) which were saved on the
hard disk using Download Manager or
Web Connection.
When the control panel displays
[MEMORY NEAR FULL], delete
resources (fonts, forms, etc.) which
were saved on the memory card using
Download Manager or Web Connec-
tion.
Solving Other Problems