Develop ineo+ 25 User Manual page 72

[SUP-
PLIES
REPLAC
E]
2-46
[DAYLIGHT SAVING]
[DATE FORMAT]
[PRESET ZOOM]
[USER FAX NUMBER]
[USER NAME]
[TRANSFER BELT]
[FUSER UNIT]
[TRANSFER ROLLER]
Settings [OFF] / [ON] (1-150 min
(Default: [60 min]))
Select whether or not daylight sav-
ing time is applied.
If [ON] is selected, specify how
many minutes the time will be
adjusted.
Settings [MM/DD/YY] / [DD/MM/
YY] / [YY/MM/DD]
Select the display format for reports
and lists.
Settings [INCH] / [METRIC]
Select the measurement units for
the preset zoom ratios.
The default setting is [INCH] for
USA and Canada, and [METRIC]
for other countries.
Enter your fax number. A maximum
of 20 characters (consisting of
numbers, spaces, + and -) can be
entered. The specified number is
printed in the header of outgoing
faxes. The default setting is blank.
Enter your name. A maximum of 32
characters can be entered. The
specified name is printed in the
header of outgoing faxes. The
default setting is blank.
Replace the counter when the
transfer belt unit is replaced with
new one.
Replace the counter when the fuser
unit is replaced with new one.
Replace the counter when the
transfer roller is replaced with new
one.
Configuration Menu Overview