Develop ineo+ 25 User Manual page 290

Symptom
You are
experienc-
ing duplex
problems.
It takes a
very long
time to
transfer scan
data to the
USB mem-
ory device.
It is not pos-
sible to enter
Scan mode
or Fax
mode.
With N-up
on multiple
copies, the
output is
incorrect.
10-30
Cause
Media or settings are
not correct.
The response time
may be slow depend-
ing on the USB mem-
ory device that is
used.
An error has occurred
in Copy mode.
Both the printer
driver and the appli-
cation have been set
for collation.
Solution
Make sure that you are using correct
media.
- See "Specifications" on page 3-2.
- Do not duplex custom-sized media,
envelopes, labels, postcards, letter-
head, glossy media, or single side
only paper.
- Make sure that you have not mixed
media types in the tray.
In the Windows printer driver ([Layout]/
[Print Type]), choose [Double-Sided].
Set duplex (double-sided) copying.
For details on setting duplex (dou-
ble-sided) copying, refer to "Setting
Duplex (Double-Sided) Copying" on
page 6-11.
For N-up on duplexed pages, choose
[Collate] only in the printer driver's
[Basic] tab. Do not set collation in the
application.
Wait until the transfer is finished.
Correct the cause of the error, and
then enter a different mode.
For N-up on multiple copies, choose
[Collate] only in the printer driver's
[Basic] tab. Do not set collation in the
application.
Solving Other Problems