Figure 3-6 Internet Protocol (Tcp/Ip) Properties Screen - NEC ElectraElite IPK II Installation Manual

Document Revision 1A
___________________________________________________________________________________
6.
7.
___________________________________________________________________________________
3 - 6
Click on Use the following IP address. For this example, enter 192.168.1.99
for the IP address and 255.255.255.0 for the Subnet mask. Click OK to accept
the changes.

Figure 3-6 Internet Protocol (TCP/IP) Properties Screen

On the Local Area Connection Status screen, click Close, then close the
Network Connections screen by clicking
Electra Elite IPK II
.
CNF(16)-U20 ETU Configuration