Table 13-3 Networking Tcp Port Example - NEC Sl2100 Networking Manual

SL2100
2.1.3 IP Address of Other Systems Within the Network
• 10-27 : IP System ID - IP Address
The IP Addresses of all other systems within the network must be defined in this program. Each
system is identified by a 'System Number' (1 to 50), this is used within the numbering plan to route
calls to another system.
Input Data
System ID
Item Item
No.
01 IP Address
System ID is related with the
System ID in the Numbering
Plan (Program 11-01-03). When
the digits are analyzed and the
system ID is determined from the
system data set in the Number-
ing Plan, the Networking call will
be sent to the IP Address set in
this program.
The IP Address should be the IP
Address of the peer CPU (Pro-
gram 10-12-01).
02 Call Procedure Port
The Port Number should be set
with the same value as the H.
225 setup port in Program
84-02- 33.
System – A
System ID: 1
IP Address: 172.16.5.10
Port: 1730
2.1.4 Networking TCP Port
• 10-20-01 : LAN Setup for External Equipment - TCP Port
Define the TCP port number for communicating to external equipment. The port number defined
should be the same in each networked system.
Input Data
13-6
Input Data
1.0.0.1 ~ 126.255.255.254
128.1.0.1 ~ 191.254.255.254
192.0.1.1 ~ 223.255.254.254
1 ~ 65535

Table 13-3 Networking TCP Port Example

01 ~ 50
Default Related Program
0.0.0.0 11-01-03
10-12-01
1730 84-02-33
System – B
System ID: 1
IP Address: 172.16.0.10
Port: 1730
ISSUE 1.0
AspireNet