Electra Elite IPK II
Document Revision 1A
___________________________________________________________________________________
6.5
Set Date and Time
The Set Date and Time page allows the user to configure the date and time of
the CNF(16)-U20 ETU. The default setting is to receive the time from the Elite
IPK System. However, the installer may also use an NTP server to set date
and time or set the date and time manually.
Figure 4-23 Set Date and Time Screen
Use NTP Server for setting system time
This setting allows the installer to
synchronize to the NTP Server.
Use Daylight Savings must be check if using NTP Server.
Use CPU Time The Conference bridge will automatically be synchronized with Elite
IPK II CPU clock.
Set date and time manually Technicians may manually enter date and time.
___________________________________________________________________________________
Multimedia Conference Bridge Installation Manual
4 - 27