Tcp/Ip Configuration; Figure 4-19 Tcp/Ip Configuration Screen - NEC ElectraElite IPK II Installation Manual

Document Revision 1A
___________________________________________________________________________________
6.2
___________________________________________________________________________________
4 - 22

TCP/IP Configuration

The TCP/IP Configuration page allows the installer to modify the TCP/IP
settings. When the Use DHCP for TCP/IP Configuration is set, the ETU
uses DHCP to obtain the TCP/IP information. When the Configure TCP/IP
Manually button is checked, the ETU uses the information supplied by the
users in IP Settings text boxes. After clicking Submit, the user must reset the
ETU for the new network settings to take effect.

When "Use DHCP" is checked you will be required to consult with your Network
Administrator to obtain the DHCP IP Address that has been assigned to the
Multimedia CNF(16)-U() ETU.

Figure 4-19 TCP/IP Configuration Screen

Electra Elite IPK II
CNF(16)-U20 ETU Web Manager